If it drops to 2.50. Paul is very first one sapu it in order to control price. This is the base line. 2.60 he already sapu. He cannot let it drop. 2.00 impossible.

Tomorrow up to friday start going up. If u are afraid. Buy on 2.74 on confirmation. Break 2.74. Me no afraid because i understand this company very well.

Last tuesday was signal. Wednesday up to today is correction. Correction is caused by klse. People fear that it is bearish end of malaysia market but i do not think so. Today is end of retracement for bull market. Bull market will complete end of 2017. Not now. No country can run away from bear market eventhough china. Still same impact to china. So tomorrow will resume back. Buy on weakness. 2.66 is the lowest for retracement. Average it. I personally do not use average. Not my style. I sapu most of 2.61. Lol...

Sumitomo is watching it.. Previous has no door to get in. Now have already. Just perfect. Maybe u do not understand. Lol..

2.69 is a strong support. Give u couple days to buy already. See on monday. No chance.

Aluminium price u see these couple days in early of this june remains on 1725 something. Last month is bearish engulfing but price does not go down immediately this week. U see carefully it is only a wedge. Search the wedge pattern in internet. If it is not a wedge, price already reach 1700 this week. And some more next week towards 1680. Wedge has enough power to shoot up the price very fast as soon as it complete. Do not under estimate wedge. 2600 is possible. Gold confirm will reach 850 but not aluminium. Thus gold is very lousy compare to aluminium. I do not produce chart anymore. Lol. Price sliding down at 17xx but this does not effect pmetal minimum operating cost. Still win a lot. Alcoa in such condition only can shutdown some part of their pots and as well as china smelters but not pmetal. Pmetal still maintain full running.. Still sui sui bo lan cai.

U dont buy. Somebody will buy. No need sell to me also. I have enough already..hahaha

Tuesday is the signal. Wednesday up to friday is correction. I do not anything unusual. 3.00 is possible. Dont forget about sumitomo. Sumitomo want to wallop whole pmetal if possible. Looking for chances.

3.50 was the price when the aluminium price was at 1980.. OK.. How about 2600 ?

Fire actually good causes panic and let me take the profit and in again now.. Or otherwise I will not know when I to take profit....Hahaha....... They still can bypass the damage pots and let it run again. Only few pots are damaged. Still can compensate back with the insurance. Not a big deal as long as it is not a power blackout.

superb pmetal

Resume back to original position 3.50. Buy buy buy. Most important aluminium price is not dying.. U see in the aluminum chart is bearish engulfing but actually not so bearish. It is a wedge toward 2600. I took several weeks to discover it. Hahaha...

The aluminium top price now is visible already. 2600 la.. timing is matching to phase 3.

I repeat this again 1700 is not pmetal most minimum operating cost. Still lower than this. Accumulate more while buyback is stilll going on. Pmetal a least has 5 thousands workers. All are looking on it. If each of them contributes 30k, how much will it be. Not yet include outsiders.

Aluminium price the lowest now can achieve is at 1710.

June 6 is running of phase 2. We may see how is the condition of coming quarter report before release it. Maybe still running in profit.

So early profit taking..at least hold until 2 months..

Retrace back is a good point to buy in. Signal was on tuesday.

At least i still have 15% profit from 2.60 to 3.00 under 2 months. Better than fixed deposit or insurance. Hahaha..

Hopefully more buyback from paul koon. Still weak sentiment due to next report.if no price still can drop below 2.50...at least paul buyback from 2.60 to 3.00.

Pmetal still maintain good profit margin for price 1700. China operation cost is at 1700 but not pmetal. Pmetal is lower than what u expected. Hahaha..

Aluminium price looks like dying but not actually weak. Price until september remains in 1700 above. Cannot be 1600.. do u know zigzag ?

2.50 i do not want it. 2.60 just perfect. Target 5.xx above is possible. Aluminium price pattern has a change. Hahaha..

Buyback gives hope.. now buyback seems another story. Do not want to share anymore the story.

I fill up most of 2.61price... hahaha...superb pmetal....

Because i am joeylee. I predict. This prediction is based on what i know. Do u know how to see chart or not? Do u know how to calculate fa or not? Hsien hui yeoh. Ok la.. i will rest couple weeks and update again. No more comment. 7 eleven temporary close..

Aid mana ada penawar.. bro

Yes but not now.. still need to to below 1633. 1500 will rebounce..

2.72 time to let go before too late. Still have many opportunities.

Below 1633 this time china producers still can sustain their operation. Ok.. thats all. Very interesting to see how it goes.. i still here comment what i want. No happy meh... sorry lo...

Global demands is decreasing. Thus aluminium price is dropping very fast. Do u understand about the operation? Once the pot is startup. It must keep running. Alcoa also the same. Thus supply over demand. They are competing with each other so reducing their sales price. Thus u can see in monthly aluminium price bar is totally bear engulfing. In asia pmetal has to compete with china aluminium producer. China aluminium producers recently have some discounts from china government make this condition worst. Last year china producer was crying but not these coming years. Out of calculation pmetal have enlarged their operation to phase 3. How much money borrowed to build this plant ? Do they need to pay interest? No more monopoly for pmetal.

Paul koon headache already think of cash... buyback... forget about it. When it reach 1633.. How many tons already in the storage if every month can only be 30% ? Global Demands for aluminium is slow down. Billet which has premium is not hot anymore. 25% of sales is from Ingot. Ingot price has no premium is very terrible la. Billet Sales within these 6 months not increasing is really trouble. Phase 3 startup on December might be postpone. So no need hope for phase 3. I also do not know when can buy in. Below 2.00 I also do not want to buy. Still under monitoring.

FA is really different from actual condition.

No like 2014.. Not more hot.. 2.72 is the highest. Dump it as you can before big player dumps it.

Malang tidak berbau, Sudah jatuh, Kena lagi..

Phase 3 project is finished on November 2015. December pot startup. No need to wait another 1 month. Confirm next report is in red. 2000 tons of billet was rejected and still not able to sell it. Every month must produce 100000 tons only can sell up to 30% only but however the pots still need to continue on, need to buy raw material to keep it alive. Short of cash. Still need to pay interest and dividen. Aluminium price will reach 1633. Too bad. Don't think it is a gold mine. Below 2.00 is possible.

2.72 is the highest it can achieve.. Still not yet complete..

aluminium price now is dropping to 1760.. Very bad. Estimate it will reach below 1633..

Hopefully there will be no gap down. Today halt trading is a sign. Gap down tomorrow means big players also losing faith. More you buy, more happier they are. I think that December 2015 is best time to collect it at the bottom.

Except buyback to save this condition. Paul Koon is not interested on his own stock. No hope. Today halt trading. Getting worst. Some very big decision has been made. Tomorrow see la.. no good

Wc in my calculation only worth at 0.5. Not now to collect it. Mukah last year also power blackout for 9 hours and what had happened to its profit. Now is 8 hours. 1/3 of the pot is hardened. They still need to shutdown and rebuild the pot again. News is deviated from actual condition. In my calculation more worst than previous case because this plant is bigger than mukah plant.

Sorry i am talking this coming future report.

Quarter report out. We see it again whether the profit is in full amount or not. If not something very wrong. More faster it drop. Then it really out of expectation again. Again and again hurting the price. So watchout la.

I see this week no trading. Let it fall. Quarter report may out on 28. I think wait on 28 to see the level and calculate again

Premium for billet is also useless.

Kenanga reported on very basic fa calculation. Main dropping not because of this plant shutdown. Billet demand is reducing. Ingot price also lousy. These factors are not included in their actual calculation.

I have switched to eforce.. Eforce quarter report is out end of this month,. Handsome profit from pmetal. Eforce also just started. Not yet reach to the peak. Peak is at 2.00

（吉隆坡20日訊）齊力工業（PMETAL，8869，主板工業產品組）位於砂州民都魯沙馬拉朱的煉鋁廠在週日（5月17日）發生火患，損失和衝擊不詳。



分析

大馬研究指出，這是齊力工業兩年來第二度被迫關廠，在2013年6月，其沐膠鋁廠因大停電而關閉，導致2013財政年需撥備4千零50萬令吉作為資產減值，該廠於2014年4月恢復全面運作。

料可渡過難關由於管理層堅穩和集團現金流強勁，該行相信齊力工業可渡過這次的難關。目前尚待該公司進一步澄清，維持財測不變，基於鋁價低迷和全球經濟前景參差，保持“守住”評級，合理價3令吉20仙。

肯納格研究對此消息深感驚訝，但不過度憂慮，因不會嚴重影響該集團財務。

據管理層指出，只是小部份廠區受破壞，對生產影響輕微，因此相信不會對其盈利帶來重大負面衝擊。

該行表示，如果齊力工業股價出現負面反應將不足為奇，建議趁低買進該股，因火患影響微、鋁價可能中短期內復甦，以及今年中可能被納入清真股。保持“超越大市”評級，目標價5令吉41仙。（星洲日報／財經）



點看全文: http://biz.sinchew.com.my/node/115718?tid=18#ixzz3afYTy3fF

smelting pot

I maybe think about it when at 2.00 below.