lolx recognition low only need mainly focus unbilled sales

Anyone could share the information shared by management in the agm session?

single customer risk beware

Ok monetary

Now is about sentiment, Mpi had invested in capex rm494m in 2021 FYF and now only for 1h of 2022 FYF had already capex Rm464m.

The management mentioned the capex is for secured customers. What else you want for Mpi? The value of it depend on you to discover and the market willing to give

Yeah, Andy Hall should go Ukraine to help

thank you so much for the sharing newbie2y

calm monetary, mpi is doing good. huge cash holding and keep doing capex for expansion with this low pe as compared to other tech stock its safer to buy

Monetary have you listen to the latest ceo interview by bfm?

Pp subsriber cut loss?

@monetary saw ur comment since early stage of Mi ipo, ur long term ticket still holding? hahaha where is yorkyork...

paktua love come back..
mi-tech now reach paktua dream level at rm5


============
Stock: [MI]: MI TECHNOVATION BERHAD
Paktua73@yes done eat at 1.95,1.96..
let bring in more..
paktua troops dare eat more..


tut tut
love red wave..
Apr 10, 2020 3:16 PM | Report Abuse
============



tut tut

now stand hold 235k unit at below 1.97..




Paktua u still hold ur long term ticket?

Victory actually cancel long time already since the covid case is slowly slow down

yeah, we wish so too

Mine banked in acc

yeah retailer bought a lot.. But local fund sold a lot!

Sry management clarified it will hit 1b sales but not revenue..

now this share sudah dah macam gtronic abang adik...

erm....

Very weak nth to say

Collect until i lembut jor

run run run give me collect

why u think so winnerz, would you mind to share your view?

There are mi technovation, equipment and smbu ... 3 website.. which is quite complicated ==

U could call to investor relation and feedback to them

kimpau, warrant and even mother share price is buy for future, u could say now vs mother is overpriced now since ems PE normally is around 15-20, but now trade at 20 plus, even warant also trade at premium..with such overpriced mother share ? But why peple willing to give such price think about it... There is potential growth again for this ems company due to various reason, stop spreading such unwise advice for those newbie and even who dont really understand the company.. My talk is end here. Thank you, do your homework and invest wisely.

can maintain 26m is very good already... If 40m then go back rm 5.5 haha

Takaful was second largest insurance company in Msia, with the one of the greatest track record it have, currently the share price is much undervalued. Anyway I am lazy to explain , do home on your own. Patient and your view will be rewarded.

Thank you cekd, time to go volcano

hahaha stop chasing pmb time for msc

StoreDot accelerate to fast-charging eVs with silicon and tin

Pioneering lithium-ion battery start-up StoreDot is focusing on silicon and tin to achieve extreme fast charging. Their first five-minute batteries will be available for testing later this year, while mass production will begin in 2024.

StoreDot announcedthat they will work with Chinese manufacturer EVE Energy to mass-produce their XFC FlashBattery for electric vehicles (EVs). “XFC technology is absolutely critical to accelerating the adoption of petrol- and diesel-free vehicles by eliminating the barrier of range and charging anxiety”, said EVE’s Chairman of the Board, Dr. Liu Jincheng. Daimler, BP, and Samsung are also key investors in the StoreDot technology.

A key component of the development is a new anode material that replaces graphite with new high-capacity materials. “Most of our efforts currently are focused on transitioning to silicon and tin”, said StoreDot CEO Doron Myersdorf.

StoreDot had previously sent Gen 1 samples to potential customers with germanium-based anodes but found this metal was not sufficiently abundant and not affordable. Their Gen 2, silicon-tin, fast charging cell already records an energy density of 240 Wh/kg, with a longevity of 1,000 cycles possible by the end of the year.

By 2028, this energy density could almost double with the launch of Gen 3 cells. These are designed with a hybrid form of solid-state technology and could store 440 Wh/kg. Lead-acid batteries, by comparison, hold 35-40 Wh/kg.

Traditionally, lithium-ion batteries use a graphite (carbon) anode. These are extremely stable at normal charging rates but have a high electrical resistance. During fast-charging, this causes needle-like dendrites to form on the graphite anode surface, damaging the battery.
StoreDot have replaced the solid graphite anode with tightly packed balls of silicon-tin to reduce resistance and increase conductivity. These nanoscale balls swell during charging, but there is enough room between the balls to limit swell-induced damage that has previously caused problems for non-graphite anodes.

Our view: EVs currently struggle to compete with petrol and diesel vehicles when it comes to refuelling; 3-4 miles per minute charging is the current industry standard for EVs. StoreDot hope their Gen 2 cells will provide 20 miles per minute, with Gen 3 reaching 25 miles per minute. If charging station innovation can keep up with StoreDot, their silicon-tin extreme fast charging cells could transform commercial EV charging.

StoreDot accelerate to fast-charging eVs with silicon and tin

Pioneering lithium-ion battery start-up StoreDot is focusing on silicon and tin to achieve extreme fast charging. Their first five-minute batteries will be available for testing later this year, while mass production will begin in 2024.

StoreDot announcedthat they will work with Chinese manufacturer EVE Energy to mass-produce their XFC FlashBattery for electric vehicles (EVs). “XFC technology is absolutely critical to accelerating the adoption of petrol- and diesel-free vehicles by eliminating the barrier of range and charging anxiety”, said EVE’s Chairman of the Board, Dr. Liu Jincheng. Daimler, BP, and Samsung are also key investors in the StoreDot technology.

A key component of the development is a new anode material that replaces graphite with new high-capacity materials. “Most of our efforts currently are focused on transitioning to silicon and tin”, said StoreDot CEO Doron Myersdorf.

StoreDot had previously sent Gen 1 samples to potential customers with germanium-based anodes but found this metal was not sufficiently abundant and not affordable. Their Gen 2, silicon-tin, fast charging cell already records an energy density of 240 Wh/kg, with a longevity of 1,000 cycles possible by the end of the year.

By 2028, this energy density could almost double with the launch of Gen 3 cells. These are designed with a hybrid form of solid-state technology and could store 440 Wh/kg. Lead-acid batteries, by comparison, hold 35-40 Wh/kg.

Traditionally, lithium-ion batteries use a graphite (carbon) anode. These are extremely stable at normal charging rates but have a high electrical resistance. During fast-charging, this causes needle-like dendrites to form on the graphite anode surface, damaging the battery.
StoreDot have replaced the solid graphite anode with tightly packed balls of silicon-tin to reduce resistance and increase conductivity. These nanoscale balls swell during charging, but there is enough room between the balls to limit swell-induced damage that has previously caused problems for non-graphite anodes.

Our view: EVs currently struggle to compete with petrol and diesel vehicles when it comes to refuelling; 3-4 miles per minute charging is the current industry standard for EVs. StoreDot hope their Gen 2 cells will provide 20 miles per minute, with Gen 3 reaching 25 miles per minute. If charging station innovation can keep up with StoreDot, their silicon-tin extreme fast charging cells could transform commercial EV charging.


BESIDE PMBTECH, DONT FORGET MSC, STILL UNDERVALUE

https://www.klsescreener.com/v2/news/view/892083

Wait and see the result

Dont worry! Sincerely much appreciated! thank you so much Goldberg

Dear Goldberg, any link for the UOB kayhian analyst report? I cant find in web... thank you so much

yeah yeah yeah, the investor who able to pay such huge amount of money will be blinded and dumbed or even con by sweet words from the company. time will tell. end ty

pp subsriber used around 270m to buy, the person who able to subsribed this much will not have short sighted as you..

More quiet the better

@newbie8080

May I know what does it mean ?

Faster throw , somone will collect

Any key of point from agm?

Coming qr not good is expected since MCO affected their project, with current new solar financing project and huge orderbook ahead with stable recurring income...and potential taiwan and philipines tenderbook, I believe solarvest is still one of the stock to watch if qr is bad and sell down

they just dont want to stereotyped related with Tins

Hope the 第十二大马计划， lagenda会受惠

The people who bid for solar in the end give contract to solarvest... Lolx

Hooray of what?

yes 1。2x is good price

Solar Financing and energy storage? I thought this is very normal...

We buy for business... So easy to give u agar agar the price, then die la